;

Why Milking Machines Suck, and Should

Sep
16

My friend Jerry dropped by the farm one day and I showed him my new milking machines. He’s interested in mechanical things, so I showed him how they all go together–the inflations and lines and so on, describing how they’re attached to the cow or goat, and bringing out my old Surge milking machine also to compare the machines. I explained that the Surge was the first milking machine that brought it all together in terms of what makes a functional milking machine that is healthy for the cow by imitating the sucking action of a calf, and that it was the basis for all modern milkers today. He looked at all the equipment and said, “So what makes it work?” I said, “There’s a vacuum pump in the barn. The machines are connected to the vacuum pump.” He said, “But what makes it work?” I said, “You plug it in! The vacuum pump runs on electricity. There’s electric in the barn.” (Because, DUH, Jerry!) He said, “BUT WHAT MAKES IT WORK?”


In that (blonde) moment, I realized that, while I demonstrate and teach about milking and milking equipment during workshops at the farm nearly every weekend, I still sometimes can lose the details in the whole of the end result. There are many parts and pieces to the puzzle that makes up a complete milking machine. Basically, it takes a village–all those parts and pieces are necessary to make the whole. But, there is one part that came to the party late. It revolutionized milking machinery and, as a crucial component of the Surge milker, became the heartbeat of every other milking machine today–so omnipresent in modern milking that I can almost forget how critical it is when I’m looking at the complete puzzle put neatly together.

Jerry, being a very inquisitively- and mechanically-minded person, was looking for that one specific piece that would make the whole make sense.

“Oh,” I said, “You mean the pulsator! That’s what makes it work.”

At which point Jerry slapped me and went home. (JUST KIDDING.)

The original milking machine. (Patent: Mother Nature.)
IMG_7877
A baby can’t swallow in one long, continuous drink. It sucks and swallows, in a regular and repeating rhythm. Suck, release, suck release. When sucking, their mouth is closed over the top of the teat, pulling the milk from the teat into their mouths. Between sucks, they release the pressure, allowing more milk to fall naturally from the udder into the teat. The baby does this over and over, sucking and releasing, until they’re satisfied.

Hand-milking. (Patent: Ancient civilization.)
IMG_8436
In hand milking, we recreate the on and off action of the calf by closing off the top of the teat then pushing down to move the milk out the tiny pin hole at the bottom. With the top of the teat pressed shut, the milk has nowhere to go but down and out. Then you release the pressure on the top of the teat, allowing more milk to fall naturally from the udder into the teat. Then close off the top of the teat again and push the milk down and out again. And repeat again. And again, just like a baby.

Modern milking machines use inflations–rather than a baby’s mouth or a human’s hands–to cover the teat. The inflation is made up of an inner liner of flexible material housed inside a protective outer shell.
IMG_8448
The inflations (two for goats, four for cows) are connected to the machine with two lines per inflation–a milk line, which transports the milk cleanly and efficiently to the milking machine bucket, and a vacuum line, which supplies the suction from the vacuum pump.
IMG_8465
Connected between the vacuum pump and the inflation vacuum lines is one very important element, and that is the pulsator, which delivers the vacuum suction on a regular interval basis, known as a pulsation rate.
diagram_edited-1
Taking this back to simpler terms, this means the suck and release of a calf or the squeeze and release of a human hand. The pulsator breaks up the vacuum, creating a pull and let go pattern instead of a non-stop pull.
IMG_8437
This makes a machine that treats the animal in a manner that imitates nature, which previous incarnations of milking machinery did not. Early vacuum pump-based milking machine attempts relied on simple straight suction at a constant level. Imagine how damaging that was to a cow’s udder. The pulsator was first employed in milking machines in the late 19th century, but was not in widespread use until over half a century later when the creators of the Surge brought the pulsator together with a fully functional overall design.

Surge, with pulsator:
IMG_8457
And over half a century again since then, milking machines today are still based on that breakthrough format. While materials, designs, and efficiency have continued to advance, the pulsator is still….

….what makes it work.

In this video, you can see the action of the pulsator applying the suck and release to the inner lining of the inflations, and thus to the teats, creating nature-inspired machine milking. I’m using my goat milker from Hamby Dairy Supply to demonstrate because it has a clear outer shell which allows you to see the magic happening inside.



Comments Leave a Comment
Share: |    Subscribe to my feed Subscribe
Posted by Suzanne McMinn on September 16, 2016  

More posts you might enjoy:






Sign up for the Chickens in the Road Newsletter

Comments

3 Responses | RSS feed for comments on this post

  1. 9-16
    10:02
    am

    Suzanne, the raw milk boutique dairy in my town will be the first dairy of any kind in Texas to have a milking robot. You or your friend Jerry might be interested in seeing how it works. They are The Waldo Way dairy in Mineola TX. Ris posted a video on their Facebook page.

  2. 9-16
    11:43
    am

    Amazing. Thank you for the demo. Looking forward to November to see it all in person once again. The calves are beautiful.

  3. 9-18
    1:15
    pm

    :happyflower:
    Thank you–very interesting. My Grandparents and Aunt and Uncle had dairy farms, they would have marveled at a milking machine, all of their cows were milked by hand.

Leave a Reply

Registration is required to leave a comment on this site. You may register here. (You can use this same username on the forum as well.) Already registered? Login here.

Discussion is encouraged, and differing opinions are welcome. However, please don't say anything your grandmother would be ashamed to read. If you see an objectionable comment, you may flag it for moderation. If you write an objectionable comment, be aware that it may be flagged--and deleted. I'm glad you're here. Welcome to our community!

Daily Farm












If you would like to help support the overhead costs of this website, you may donate. Thank you!

Sign up for the
Chickens in the Road Newsletter




The Slanted Little House

"It was a cold wintry day when I brought my children to live in rural West Virginia. The farmhouse was one hundred years old, there was already snow on the ground, and the heat was sparse-—as was the insulation. The floors weren’t even, either. My then-twelve-year-old son walked in the door and said, “You’ve brought us to this slanted little house to die." Keep reading our story....



Today on Chickens in the Road


Join the Community in the Forum

Search This Blog



Out My Window

Walton, WV
37°
53°
Mon
63°
Tue
71°
Wed
Weather from OpenWeatherMap

Calendar

February 2017
S M T W T F S
« Jan    
 1234
567891011
12131415161718
19202122232425
262728  


I Love Your Comments

I Have a Cow


And she's ornery. Read my barnyard stories!





Entire Contents © Copyright 2004-2017 Chickens in the Road, Inc.
Text and photographs may not be published, broadcast, redistributed or aggregated without express permission. Thank you.

Privacy Policy, Disclosure, Disclaimer, and Terms of Use

Contact