;

Chickens in the Road Forum

A A A

Please consider registering
guest

Log In Register

Register | Lost password?
Advanced Search:

— Forum Scope —



— Match —



— Forum Options —




Wildcard usage:
*  matches any number of characters    %  matches exactly one character

Minimum search word length is 4 characters - maximum search word length is 84 characters

Topic RSS
HELP! Need MORE refinishing advise!
March 16, 2011
10:58 am
bgheuchert
Big Chicken
Forum Posts: 52
Member Since:
February 22, 2010
Offline

Everyone was so wonderful helping me refinish my old butchering table that when I rescued this 1903 tin ceiling I thought of my CITR family right away!  My husband and I are now building a house, this will go in the new bathroom off of the master, what do you think!??  The bathroom is 10x10 and we are going to coffer (is that how you spell it????) the ceiling and set this beautiful tin tile into it! And yes, if you were one of the wonderful people who helped me with the table, I ended up stripping it and a light sanding, now I will wait for the bathroom and turn it into my vanity! :)

Now the questions!! HOW DO I REDO IT!!?? Do i just strip the paint, then prime and paint? Is there any thing that would react poorly to the tin when I go to strip it??  Here are a few pictures of it, I have more including trim etc.. but need to wait to pick it up for a week or two, but you will get the point, any advice would be appreciated!!!

March 16, 2011
11:00 am
bgheuchert
Big Chicken
Forum Posts: 52
Member Since:
February 22, 2010
Offline

let me try the photos again!!

 

http://i1179.photobucket.com/albums/x393/bgheuchert/everythingfromnewcamera107.jpg

http://i1179.photobucket.com/albums/x393/bgheuchert/everythingfromnewcamera106.jpg

 

http://i1179.photobucket.com/albums/x393/bgheuchert/everythingfromnewcamera106.jpg

March 16, 2011
11:08 am
bgheuchert
Big Chicken
Forum Posts: 52
Member Since:
February 22, 2010
Offline

http://i1179.photobucket.com/albums/x393/bgheuchert/everythingfromnewcamera105.jpg

 

one more!

March 16, 2011
9:08 pm
Urbanite
Mighty Chicken
Forum Posts: 127
Member Since:
September 19, 2010
Offline

I don't have any idea how paint stripper would react to tin, but those tiles will be beautiful when you are done. I'm not sure if they make different paint stripper for metal, but a quick search in Google implies that they do. I would try contacting the paint stripper manufacturer to see what they have to say about tin. There is usually a phone number on the container. Be cautious, though. Make sure any advice seems to make sense and they seem to know what they are talking about.

It is quite possible that the paint on the tiles contains lead, so you want to be very careful about that, too.  

March 16, 2011
9:13 pm
Urbanite
Mighty Chicken
Forum Posts: 127
Member Since:
September 19, 2010
Offline

A little further research says you can boil off the point (be prepared to sacrifice the pan), burn it off (not guaranteed to work, though), or sandblast (expensive).  I have no personal knowledge of how well any of these would work; I only pass it along for you to consider if you like. My own experience with refinishing has all been with wood, not metal.

March 17, 2011
8:34 am
hershiesgirl
Mighty Chicken
Forum Posts: 294
Member Since:
August 24, 2010
Offline

The recommended method for removing old paint from hardware (such as door knobs and hinges) is to soak it in hot soapy water in a crockpot over night. You might try the same sort of method on the tin. Maybe a large bucket of hot water?  The paint *may* loosen and then pull right off.

If that didn't work, I would try the orange-based "natural" strippers next. Test on the back of the tin to see if it reacts and discolors the tin.

Remember that it has probably been painted previously with LEAD PAINT. The paint itself is not a danger, but the dust and paint flakes are! Make sure you wear a mask, and work over a newspaper or a plastic tarp so you can easily dispose of the paint. Vacuum the dust frequently as you work on your project.

Sandblasting would be a last desperate resort, because unless you know someone that is really, really good at sandblasting fine surfaces, there is a good chance your tin will end up pitted and damaged.

March 17, 2011
8:40 am
langela
Mighty Chicken
Forum Posts: 176
Member Since:
February 6, 2011
Offline

I just found that you can use Easy Off oven cleaner to remove it. Never tried it but the people that did said it worked great.

March 18, 2011
1:14 pm
bgheuchert
Big Chicken
Forum Posts: 52
Member Since:
February 22, 2010
Offline

thank you ladies!! i cant wait until i can get them in the new house, yes it will be about a year yet, but oh the day dreaming in the meantime is wonderful!! OH and just so anyone wondering about the butching table, i stripped it and it is waiting to become my bathroom vanity, it is as excited as i am!!

March 18, 2011
3:20 pm
DarleneS
Mighty Chicken
Forum Posts: 103
Member Since:
May 18, 2010
Offline

Just beware that using a torch to burn it off is a no-no. My husband did that to some old window frames that had several coats of lead paint on them and he got terribly sick. The fumes he breathed went straight to his lungs. Of course the dummy didn't wear a mask.

March 19, 2011
7:48 pm
Valerie
Big Chicken
Forum Posts: 76
Member Since:
February 8, 2009
Offline
10

Please post pictures when you're done. I'm sure it will be gorgeous. DH and I are planning our kitchen/mudroom/bathroom reno, and plan to use tin ceiling panels, and so I'm very excited for you.

"Outside of a dog, a book is a man's best friend. Inside of a dog, it's too dark to read." – Groucho Marx
March 20, 2011
8:32 am
hershiesgirl
Mighty Chicken
Forum Posts: 294
Member Since:
August 24, 2010
Offline
11

Valerie said:

Please post pictures when you're done. I'm sure it will be gorgeous. DH and I are planning our kitchen/mudroom/bathroom reno, and plan to use tin ceiling panels, and so I'm very excited for you.

Yep,  I'm excited for you too, a little jealous even! I think the pictures are a requirement. :)

March 21, 2011
12:01 am
bgheuchert
Big Chicken
Forum Posts: 52
Member Since:
February 22, 2010
Offline
12

I will absolutely post pictures when I am done!! It will probably be a good year until everything is complete as we will be building most of the house ourselves, ok ok my husband and my dad are doing it, I consider myself more of the "project manager" we will say hahaha! But yes for the bathroom I have already scored the antique ceiling, an antique clawfoot tub (for only $120!!!!), and some of you might remember the old butching table I posted about a while back, it is being made into my bathroom vanity. CAN'T WAIT!!  Now I am looking for antique salvaged solid wood doors for throughout the house, and I cant believe it but I have found them, like 15 miles away, total SCORE! My dad thinks I will be filling my house will old junk, my husband thinks it will look great, but is OH SO MUCH WORK, but let's face it, I am the "project manager" and I decided a long time ago that it would be awesome!  SO EXCITED!

March 21, 2011
6:17 am
hershiesgirl
Mighty Chicken
Forum Posts: 294
Member Since:
August 24, 2010
Offline
13

bgheuchert said:

I will absolutely post pictures when I am done!! It will probably be a good year until everything is complete as we will be building most of the house ourselves, ok ok my husband and my dad are doing it, I consider myself more of the "project manager" we will say hahaha! But yes for the bathroom I have already scored the antique ceiling, an antique clawfoot tub (for only $120!!!!), and some of you might remember the old butching table I posted about a while back, it is being made into my bathroom vanity. CAN'T WAIT!!  Now I am looking for antique salvaged solid wood doors for throughout the house, and I cant believe it but I have found them, like 15 miles away, total SCORE! My dad thinks I will be filling my house will old junk, my husband thinks it will look great, but is OH SO MUCH WORK, but let's face it, I am the "project manager" and I decided a long time ago that it would be awesome!  SO EXCITED!

You and I must be kindred spirits! That is exactly how I do things, too…. get a "picture" in my head, and search for cheap, or even better….free! stuff to do it with. I have unhandy friends that just can't understand why I want so much stuff that needs to be 're-done' ….well, that's half the fun, that's why!!  Besides, nothing gets me higher than scoring a great bargain. :)  I have been collecting "stuff" for our 100+ year old house re-do for two years. I have some beautiful treasures, and have not paid more than $100 for any one thing.

All RSS
Forum Timezone: America/New_York

Most Users Ever Online: 120

Currently Online: KLabmom, kellyb, mamajhk, agtaglink
18 Guest(s)

Currently Browsing this Page:
1 Guest(s)

Top Posters:

Leahld22: 2676

Ross: 1949

MaryB: 1777

JeannieB: 1477

Shells: 1184

Member Stats:

Guest Posters: 13

Members: 5887

Moderators: 3

Admins: 4

Forum Stats:

Groups: 1

Forums: 14

Topics: 2994

Posts: 57776

Newest Members: christiewahlert, basketsldj, joycelorelle, Leah Beth, bwshook, Amy

Moderators: Pete (7965), wvhomecanner (3063), Flatlander (1555)

Administrators: Suzanne McMinn (7255), emiline220 (15), CindyP (7770), BuckeyeGirl (4362)

Sections

  1. The Farmhouse Blog
  2. The Chickens in the Road Forum
  3. Farm Bell Recipes

Latest Posts on the Farmhouse Blog:

Sign up for the Chickens in the Road Newsletter, too!

Daily Farm

IMG_1330






If you would like to help support the overhead costs of this website, you may donate. Thank you!

Forum Buzz

Site Info

Privacy Policy, Disclosure, Disclaimer, and Terms of Use

Contact